Service conditions
A ball valve opens or closes the pipeline by rotating a ported ball. Port geometry, seats and stem sealing determine its operating performance. Selection should consider differential pressure, fluid cleanliness and cycling duty together.
Configuration
Select the manual operator or actuator to suit the valve torque or thrust requirements and site operating conditions. Provide access and clearance for manual operation. For frequent cycling or remote operation, assess actuator output, duty cycle and valve-position feedback.
Service conditions
Threaded interfaces require matching thread form, size and sealing method. Select sealing material for the fluid and temperature, and consider assembly torque and support of adjacent piping.
Construction and description
Welded ends must suit pipe material, wall thickness and the construction procedure. Heat effects, protection of internal seals and post-weld cleanliness are important. Set welding parameters and inspection methods for the actual materials and joint.
Service conditions
Specify the process-fluid composition and steady-state, startup and shutdown conditions, then evaluate the body, wetted internals and sealing materials together. Solids, deposits and cleaning procedures can affect sealing surfaces and operating mechanisms. Base the maintenance plan on the actual service conditions.
Illustrative industry scene
Illustrative industry scene
Illustrative industry scene